Production process of sterilized tableware blank1

The traditional disinfection tableware is hand-made, and now it is industrial production, but the first thing to do is to prepare the blank. The process can refer to the following knowledge: 1 sediment material into the factory, due to factory production, sediment materials are more, large vehicles and ships are mostly used for transportation. (2) ingredients, because different disinfection tableware has different mechanical strength, color, fineness and so on, the raw materials required for the blank body are also different to some extent, and the details are formulated according to the tableware produced. ③ Ball milling, loading sediment into the ball mill through the conveyor belt, adding water and other additives, setting the ball milling time to a certain fineness according to the requirements of mud fineness to determine whether the slurry is qualified. ④ Remove iron from stale, remove iron impurities and put the mud into the slurry pool for a period of time to make it mix evenly and reach the production standard. ⑤ Spray drying, press the mud that meets the technological requirements into the atomizer in the drying tower through the plunger pump pressure, and the atomizer atomizes the mud into fine droplets, dry and dehydrate under the action of hot air to make powder of certain particle grade. After the disinfection of the tableware blank is completed, the next production process can proceed smoothly and finally get high-quality tableware.