Production process of ceramic cup

The production process of the ceramic cup: 1. Clay mud: stone is taken from the mining area, pounded with water, elutriated to remove impurities, and precipitated into brick-like mud. Then mix the mud with water to remove the slag, rub it with your hands or step on it with your feet to squeeze out the air in the mud and make the water in the mud even. 2. Drawing the billet: Throw the mud ball at the center of the turntable of the potter's wheel, and draw the rough shape of the billet by flexing and stretching. 3. The impression of the blank: the shape of the impression is to be rotated in an arc within the blank, and the semi-dry blank is placed on the mold, and the outer wall of the blank is evenly pressed, and then demolded. 4. Rigid billet: Lay the billet on the sharp bucket of the potter wheel, rotate the turntable, and use a knife to turn the billet to make the thickness of the billet appropriate and the surface and the inside smooth. This is a process with high technical requirements. 5. Expose the billet: Place the processed billet on a wooden rack to dry. 6. Carving: Use bamboo, bone or iron knives to carve patterns on the dried or semi-dried body. 7. Glazing: Ordinary round mouth adopts dipping glaze (dip the blank into the glaze basin, and immediately raise it when the mouth is flush with the glazed surface) or glaze (pour the glaze slurry into the blank and shake to make the top, bottom, left and right glaze evenly, and then quickly Pour out the excess glaze slurry), cut ware (compared to 'round wareSuch as bottles, statues, pots, pots, etc., are called 'cutting devices') or large round wares with blowing glaze (the method is to cover the bamboo tube with fine yarn, dipped in the glaze, and blow with the mouth. Repeat this many times, the thickness of the blank Uniform glaze layer). 8. Kiln: The time course is about one day and night, and the temperature is about 1300 degrees Celsius. First build the door of the kiln, ignite the kiln. The fuel is pinewood, guide the piling technology, measure the fire time, grasp the temperature change of the kiln, and decide the ceasefire time. 9. Colored glaze: On-glaze colors, such as multicolored and famille rose, are used to draw patterns and fill colors on the glaze surface of the fired porcelain white porcelin dinnerware, and then burn it in a red furnace at a low temperature, the temperature is about 700-800 degrees Celsius. In addition, before firing the kiln, painting on the green body, such as blue and white, red in glaze, etc., is called red in glaze, which is characterized by the color that will never fade under the high temperature glaze.

In the present growing world of emerging technology, the has demanding operation in various sectors like Porcelain Dish Set, Ceramic Dinnerware Sets, Porcelain Dish Set and many other industries at Ceramic Dinnerware Sets levels of manufacturing and designing.

Guangdong Hosen Two Eight Ceramics Co.,Ltd will continue to bring our industry nuances of style and approaches to catering serveware which are consistent with our evolving aspirations.

Porcelain Dish Set porcelain dinnerware set are primarily used for Ceramic Dinnerware Sets.

In various different types of Porcelain Dish Set, Ceramic Dinnerware Sets catering tableware is one of the most commonly used.

The Porcelain Dish Set catering dishware is an all-servo system capable of storing hundreds of Ceramic Dinnerware Sets process parameters to provide custom Porcelain Dish Set profiles for each Ceramic Dinnerware Sets type and Porcelain Dish Set configuration.