Prevention of slag dropping of sterilized tableware

Many users will encounter the problem of slag falling when they open the packaging of disinfection tableware. Because the product is ceramic products, small fragments will cause scratches and the like, and the consequences will be unimaginable if they accidentally mix into the mouth, therefore, we need to find out the cause of slag falling and find a way to solve it. 1. When the disinfection tableware is loaded, the place between the Sagger and the Sagger is not smooth or the track is uneven, and the force is too large, causing the Sagger to shake or vibrate when the kiln car is pushed. 2. When loading blank or kiln overlapping sagging, it is not handled lightly, which causes slag crumbs to fall into the blank bowl. 3. Because the ash on the Sagger is not cleaned, it is stuck to the hand and brought into the billet. 4. The Sagger with disinfection tableware is cracked and not repaired. 5. When the blank is not blown clean, the dust particles of the blank are not cleaned, or the blowing ash of the Blank bowl is too heavy after it is put into the box, and the ash in the bowl is blown into the blank. 6. Before the calcination of the soil box, it is not carefully arranged and folded one by one, sitting on the edge of the flat mouth, matching the dead mouth surface, and using kaolin slurry to draw the dead line. 7. The brush after the calcination of the ring box is unclear, and the paint is not coated or the paint is too thin. 8. The quality of the sagging bowl containing disinfection tableware is poor. After high temperature roasting, the loose bottom cracks. 9. The dust in the blank loading site is large and the pollution is serious. After the blank is installed, it is not covered, so that the dust falls into the sterilized ceramic tableware blank. 10, improper paint or paint and the bottom of the Sagger is not bonded, and fell into the blank. Disinfection tableware in the production, taking into account the fragile characteristics of ceramics, need to be handled gently and regularly clean the production equipment, in addition, but also to avoid the entry of dust during the packaging process, in this way, the problem of slag falling can be better avoided and the normal use of people will not be affected.