Placement of disinfection tableware before firing

Disinfection tableware should be placed in a good position before firing, and then placed in turn to avoid chaos. 1. The pad cake inside the disinfection tableware should be flat and the blank tire should be flat and upright. 2, stacked bowls, should leave the gap of the bowl mouth, to prevent the cup mouth from sticking to each other. Do not touch or touch the bowl when covering another disinfection tableware. 3. When moving and placing, the end should be flat and stable. Each eye (Section) Before the kiln is installed, plan in advance and arrange the location of the disinfection tableware column. The distance between the column and the column is about 3 ~ 4 cm, the distance from the kiln walls on both sides is about 15 ~ 20 cm, about 10 ~ 15 cm. 4. The disinfection tableware columns close to each other on both sides should be fastened and kept stable. The lower part of the tableware should be installed directly, and the upper part gradually inclines slightly to the center. If 5 rows and 7 columns are installed between 1 eye and 1 eye, the third row will be installed straight, the first row will lean backward by 3 cm, and the second row will lean backward by 2 cm, the fourth row leans forward by 2 cm and the fifth row leans forward by 1 cm. 5. In order to keep the disinfection tableware column stable, the gaps between the front, back, left and right sides of each column of tableware should be tightly plugged with fragments of broken disinfection tableware, and the height of the plug should be the same, so that the focus point is in a straight line, close to each other. The knowledge of firing and placing disinfection tableware is introduced here. If you want to know more, please contact us.