Method for increasing brightness of magnesium reinforced porcelain disinfection tableware

In order to make the magnesium reinforced porcelain disinfection tableware look more textured, brighter and more comfortable to use, we usually use some methods to achieve this goal, one of the important points is polishing. 1. Flame polishing: use flame to soften and bake the surface of magnesium reinforced porcelain disinfection tableware, and fire impact to remove some twill on the surface. 2. Polishing with polishing powder: This method is to remove scratches by high-speed friction on the surface of magnesium reinforced porcelain disinfection tableware, which can maximize the light transmittance and refraction effect of the Cup, before polishing, the polishing part must be polished with abrasive belt (King Kong mo Sha disc with more than 400 mesh is required) , There are many materials used in this way, and the best effect is cerium oxide (Rare earth polishing powder), But this process speed is relatively slow; 3. Acid treatment and polishing: the surface treatment is carried out by using the corrosive effect of acid on the surface of the disinfected tableware. Before polishing, it is also necessary to use abrasive belt to Polish, because acid polishing will reduce the thickness of the ceramic itself a lot, moreover, the surface lines may not be completely removed, and the batching method of acid solution must be changed with the different materials of the Cup. Magnesium reinforced porcelain disinfection tableware should be abandoned if obvious abnormal changes are found in the tableware during the implementation of this process. Choose high-quality products to go to the market.