Magnesium reinforced porcelain disinfection tableware cleaning precautions

In order to make the surface of the disinfected magnesium reinforced porcelain disinfected tableware smooth and odorless, and reach the standard of conformity, attention should be paid to both placement and drying during cleaning. ① Washing and disinfection solution should be prepared temporarily and replaced at any time; (2) dishwashing room and disinfection room must be kept clean, hygienic and bright, and must meet the hygiene standards. (3) special area, we all know the dirty degree of tableware just recycled, so every step of the processing program should pay special attention to it, and obvious marks should be attached to the exclusive area of magnesium reinforced porcelain disinfection tableware. (4) when cleaning, qualified detergent should be selected, hot water should be injected, the detergent should be stirred evenly, the water temperature should be controlled at 40C, and the tableware should be soaked in the pool for 5 to 10 minutes before cleaning. ⑤ The disinfection process is necessary. The cleaning process only removes the dirty substances on the surface, but bacteria still exist, so disinfection treatment is required. ⑥ After cleaning, all magnesium reinforced porcelain disinfection tableware that can be disinfected by steam shall be placed in the steam car for disinfection. The steam temperature is greater than or equal to 95 degrees, and the cooking time is 15 to 30 minutes. ⑦ After the sterilized tableware to be disinfected is dried, it should be placed in a designated position and sealed with a cap to prevent bacteria from being immersed. Magnesium reinforced porcelain disinfection tableware needs to be tested after cleaning, and unqualified ones need to be cleaned again.