High pressure grouting molding method for disinfecting tableware

In order to ensure the hygiene and cleanness of meals, every restaurant in the modern city will use sterilized tableware for people to use, usually, the production of large quantities of non-toxic tableware will use high-pressure grouting to make the tableware quickly shaped and disinfected. 1, disinfection tableware porcelain fine, soft color, the performance index almost reached the level of similar products. Why is the tableware high in strength when there are more orstellite and a small amount of cordierite dispersed in less glass phase in the matrix? Because more interwoven network of needle-like mullite and few pores. 2. Grouting forming method is suitable for ceramic products such as disinfection tableware. Tableware with complex shape, thin wall, irregularity, large volume and lax size requirements can be formed by grouting method. The traditional process of grouting forming is to inject mud into the gypsum model, and the gypsum mold absorbs the moisture of the mud to form a certain thickness of the blank. High-pressure grouting molding process is a common process for disinfecting tableware. This process can form tableware of different shapes, and the hygiene of the whole tableware production process is strictly guaranteed. And the hardness of the tableware is large, bright and clean as new. Disinfection tableware high pressure grouting, especially because of its convenient and flexible, timely and effective, and the characteristics of rapid repair of furnace lining without special shutdown, has been widely used at home and abroad as an important means of regular maintenance of blast furnace, the annual gunning lining is no longer used. Especially through this kind of furnace protection method of timely grouting, lining making and nip in the bud, it can replace the medium repair of blast furnace and delay the overhaul of blast furnace, give full play to the high efficiency and competitive strength of Blast Furnace Ironmaking. 1. The operation of folding and shortening the shutdown time and pressing into the lining is only carried out when the blast furnace is closed, which is generally combined with the scheduled inspection of the blast furnace; However, in case of special circumstances, on the premise of ensuring safety, there is no need to take off the wind to carry out short-term grouting lining in normal smelting, and no need to drop the material line, so as to shorten the shutdown time of the blast furnace and achieve the purpose of increasing production and increasing efficiency. 2, flexible folding construction organization, because there is no need to drop the material line, so the pressure lining does not need to wait until the blast furnace is in danger, then specially arrange the inspection and repair of the lining, but as one of the usual maintenance measures, it can not only cure head and foot pain for headache, but also carry out local maintenance, and prevent them from happening before they happen, so as to avoid causing great losses. 3. Folding reduces the consumption of refractory materials press the lining into the blast furnace lining as a means of maintenance. According to the damage of the lining, periodic local lining is carried out, which generally does not require large-scale repair, thus reducing the consumption of refractory materials. 4. The folding material has superior performance. The Blast Furnace Press-in material adopts non-water combined products, and press-in materials of different materials can be adopted according to different conditions. Compared with water-containing gunning materials, the characteristics and working performance of its materials have been greatly improved. The production of sterilized tableware by means of high-pressure grouting can greatly reduce the time required for mass production and this method can ensure that there will be no problems with the quality of the produced tableware, thereby improving production efficiency and revenue.