Grouting molding steps for disinfection tableware

The processing of sterilized tableware is completed according to certain production process standards. You may have known the process principle of grouting molding, but you don't know the grouting steps, it can also be said that it is not known how to do it at all. As a user, it is normal not to know this knowledge, but it is also necessary to understand this knowledge. Next, let's introduce the grouting steps. (1) after the mud is injected into the disinfection tableware mold, the water in the mud is absorbed through the capillary force of the gypsum mold. First, the water in the mud close to the mold wall is absorbed, and then the particles in the mud begin to approach, form the initial thin mud layer. ② Water is further absorbed, and its diffusion power is the pressure difference and concentration difference of water. The thin mud layer gradually thickens, and the water inside the mud layer diffuses to the outside. When the thickness of the mud layer reaches the thickness of the injection piece, the blank of magnesium products is formed. ③ The plaster mold continues to absorb water, the sterilized tableware blank begins to shrink, and the water on the surface begins to evaporate. After the blank is dried to form a raw blank with a certain strength, the mold is released and the grouting molding is completed. The manufacturing process of sterilized tableware is complicated. If you want to achieve good use effect, you cannot do without grasping these processes, especially the control of details, just like the control of thickness, if the thickness does not meet the requirements, it will not only affect the subsequent production process, but also affect the product quality after the production is completed. Small editor: fir