elf ceramic dinnerware set of 12 how to make a sublimation mug wrap | ehow

Making your own decorative mug using the sublimation process is an easy way to create your own artwork.By maximizing the use of household items, you can make a beautiful matching coffee cup for your own kitchen, or make gifts for those special people in your life.In any case, the final product is unique because it is made with your own hands and artistic eyes.
Create a transfer by printing the selected image to the transfer paper.Trim the transfer to the appropriate size so that it covers the entire Cup from top to bottom and from one side of the handle.Cut the hot tape into two pieces-Inch pieces and apply to the middle of both sides of the transfer.
Allow half an inch of tape to stick out on each side.Place the transfer center on the mug and tape it on one side.Slide around the container with your thumb to keep the Cup tight.
Seal the second edge with tape.
Wrap the mug around the mug and transfer the image so that even on both sides of the mug handle.Tighten the mug package using a drill bit or manually tighten it with a nut drive.Do not let the edge of the package touch the mug handle.
Place the mug upside down on the oven rack and heat it at 400 degrees in the convection oven.If more than one cup is heated at a time, place the cup evenly on the oven rack.Heat for about 15 to 18 minutes.Use gloves to remove the hot cup from the oven.
Tilt the fan down 45-The angle next to the Cup, open it and let it run for three to five minutes to cool the Cup.Remove the hot tape and transfer the image with gloves