Professional Ceramic Tableware Sets Manufacturer And Wholesaler For Star Hotel & Restaurant Since 1998.

How to eliminate the dregs during the production of ceramic tableware?

by:Two Eight     2021-08-05
How to eliminate the dregs during the production of ceramic tableware? Dregs is also called dirty, which means that slag particles such as box sand and bran ash are stuck on the surface of the product. The mass production of daily-use chinaware ceramic meets the needs of people's daily life, but the generation of ceramic slag not only affects the appearance of daily-use tableware, but also brings great harm to people's health. The causes of slagging in the production process of ceramic tableware are: 1. Unstable placement between the sagger and the sagger during loading, or uneven track, excessive force, causing the sagger to shake or vibrate when pushing the kiln cart and drop the slag particles. 2. When loading the blank or kiln overlapping the sagger, it is not handled gently, which causes the slag chips to fall into the blank body. 3. Because the ash on the box body is not cleaned, it sticks to the hands when loading the blank and is brought into the blank body. 4. The box itself is cracked and used without repair. 5. When the blank is loaded, the dust particles of the blank are not cleaned, or the ash blown is too heavy after the blank is put into the box, and the ash in the bowl is blown into the blank. 6. Before calcining the earth boxes, they are not carefully arranged and folded one by one. Sit flat on the edge of the mouth, match the dead mouth surface, and draw the dead line with kaolin slurry. 7. The brush after calcining the sound box is not clean, the paint is not applied or the paint is too thin. 8. The quality of the saggar is poor. After high temperature roasting, the loose bottom is cracked. 9. The billet loading site is dusty and polluted seriously. After the billet is loaded, it is not covered, causing the dust to fall into the billet. 10. Improper coating or the coating does not adhere to the bottom surface of the saggar, and falls into the blank. Ways to overcome the dregs during the production of ceramic white porcelin dinnerware: 1. Before the earthen caskets are smelted and burned, they must be sorted one by one, folded, and branched to prevent confusion. 2. To check the quality of the saggar, the saggar that needs to be repaired should be repaired, and the scum and dust of the saggar should be cleaned up, and the bottom of the saggar should be evenly coated with a layer of paint. 3. The loading personnel should carefully and strictly operate, blow off the dust of the blanks before inserting the blanks, use light methods when loading the blanks, and stack the magazines stably, flat, and neatly to prevent skewing and bumping caused by gravity movement. 4. When installing the kiln, clean the dust in the box, handle the sagger gently, and do not wipe the counterpoint. 5. The track should be flat and clean, and the cart should be slow to prevent the saggers from shaking and squeezing each other.
Guangdong Hosen Two Eight Ceramics Co.,Ltd have now decided to extend our company in other countries.
For more information on Porcelain Dish Set catering dishware and how to find the best quality at the right price, check out Two Eight Ceramics.
Guangdong Hosen Two Eight Ceramics Co.,Ltd must adopts new technology and internal procedures to increase responsiveness and mitigate costs going forward.
Ceramic Dinnerware Sets needs not be tedious anymore with the application of . So getting the right catering serveware can drastically promote Porcelain Dish Set.
Two Eight is designed to enhance your savings in terms of cost, energy and efforts.If you are interested in our catering crockery wholesalers Ceramic Dinnerware Sets products, please contact us soon.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Sign in with: